Virtual planning
Put together your individual van racking system.
High-voltage measuring device
U/I-Multimeter, AC/DC mit Ethernet-Schnittstelle (TCP/IP)
High-voltage measuring device
U/I-Multimeter, AC/DC mit Ethernet-Schnittstelle (TCP/IP)
AC: 2 V … 7 kV / 15 µA … 500 mA
DC: ± 1V ... ±10 kV / ±15 µA ... ±500 mA
The high-voltage measuring devices were developed to be able to carry out precise and fast high-voltage and current measurements in calibration and development laboratories in particular. All the parameters can be programmed via an Ethernet interface. Corresponding driver modules make integration in existing systems easier.
- Self-contained measuring device for universal use in laboratories and automated systems
- Ethernet interface (TCP/IP)
- Front: 2 x 1.8 m high-voltage cable with TOPAS plug connection
- Rear: DUT connection via 2 x integrated TOPAS connection sockets
- 2.5 m mains connection cable - Schuko plug - IEC socket
- 3 m network cable CAT6 (patch cable)
- Integrated bracket enables easy carrying and a better view of the display thanks to individual set-up positions
- Robust housing (W = 260 mm, D = 260 mm, H = 160 mm)
Current measurement
±15 µA (DC) ... ±500 mA (DC)
15 µA (AC) ... 500 mA (AC) / trms
Measuring ranges
1 mA
10 mA
100 mA
500 mA
Voltage measurement
±1 V (DC) ... ±10 kV (DC)
2 V (AC) ... 7 kV (AC) / trms
Measuring range
10 kV
Measuring method
24 bit ∑ - ∆ - converter
- Load resistor network (5 / 10 / 100 / 500 kOhm, 1 / 5 MOhm) (Art. No. 94-8R)
- Elution® software
- Factory calibration (Art. No. SM-MEAS-0-E099) or DAkkS calibration (Art. No. 94-8F)
Download
Hier muss noch das richtige PDF eingefügt werden!
