Virtual planning
Put together your individual van racking system.
High-voltage device HighPerformance
Item-number: F1-1A Z200 / F1-1M Z200
Test voltage: 100–2,500 V AC, 200–3,000 V AC
The multi-colour touch panel enables ergonomic operation of the test units, which are equipped as standard with an RS232C serial interface (optionally with Ethernet or USB). All units are also available without an operating module, e.g. for use in automated systems.
Modular high-voltage test unit
Depending on the variant and the level of expansion, the units offer flexible application options for manual or automated high-voltage or insulation resistance testing on systems, assemblies or components.
With touch panel: F1-1A Z200
Without touch panel: F1-1M Z200
Test voltage: 100–2,500 V AC, 200–3,000 V AC
The multi-colour touch panel enables ergonomic operation of the test units, which are equipped as standard with an RS232C serial interface (optionally with Ethernet or USB). All units are also available without an operating module, e.g. for use in automated systems.
Modular high-voltage test unit
Depending on the variant and the level of expansion, the units offer flexible application options for manual or automated high-voltage or insulation resistance testing on systems, assemblies or components.
With touch panel: F1-1A Z200
Without touch panel: F1-1M Z200
Technical specifications
- 19" rack-mount design
- High-quality metal housing
- Access control via configurable password levels
- Easy to service – can be replaced in just a few simple steps
- Interfaces: Ethernet or, alternatively, via RS232-C or USB
Test voltage
100 .. 2,500 V AC
200 .. 3,000 V AC
200 .. 3,000 V DC (optional)
300 .. 3,000 V DC (optional)
Voltage ramp
Freely programmable for start and end of test
Power rating
500 VA
Trigger current
0 .. 1 / 10 / 200 mA
Interface
RS232-C
Mains voltage
230 V / +/- 10 %
49 .. 51 Hz
Dimensions
19” / 4U / depth 360 mm
Expansion modules
DC voltage
Test voltage: 200 .. 3,000 V DC
Trip current: 0 .. 1 / 10 / 200 mA
Insulation resistance
0.1 .. 1 / 10 / 100 MΩ + autorange
Additional digital outputs
6 digital outputs for controlling an external switching matrix
Safety current limit
< 3 mA for AC
< 5 mA for DC
Voltage readback
Module enables four-wire measurement by reading back the test voltage
Burn-in
Overcurrent trip can be deactivated for troubleshooting
Ethernet
Alternative interface to RS232-C
USB
Alternative interface to RS232-C
Software package
Elution® Device software package
Accessoires
- 93-1B 19" / 4U enclosure
- Primus Basic test unit
- 94-2A test gun
- F9-1A warning light
- F9-1L-01 two-hand control
- F9-1D foot switch
- 94-3A/B test cage
- 94-2M Z01 dummy module
